Otsitakse arhitekti järgmise projekti jaoks -
Modifikations of garage for Residential.
I want to replace the garage door with window. Look sketch 1. There is a metal door from garage to Katlaruum. There are Warm in the floor, and electricity. Garage has never been used for car.
When the garage will become part of the house, I would like to build a carport with a tool room at the end of the carport.
The plot is 1260m2 and the building percentage is 15% - that is, I can build a total of 189m2 in one house.
As the house today is 155m2 with garage I have 34 m2 left which I can use for a new extension
Material list for carport and tools room
For roof Eterniit Villa 875x920 brown
For substrates for roof 45 x 45
Under the roof of the roof there are rafters with a distance of about 60 cm in between and the tree is in thickness 95 x95mm
The supporting posts are 95x95mm thick
Screwed into the ground 90 cm down distance between - see the sketch Size is not the same between posts because these area have a lot of big stone in earth.
For ceiling interior, wood is used in size UYS 21x145 for carport and tools room
The frame for the floor in the tools room is used 50x100 with a space of 48 cm between and an insulation EPS 80-50 between the rafters and on top of a layer of plastic 0.2mm
and finally laid an OSB plate in 22mm thick
The walls are constructed of 50x100mm wood with a distance of approx. 55cm between insulation KIVIVILL 100 mm lined with plastic on the inside 0,2mm. On the inside the house is covered with 12mm OSB PLATE and on the outside the house is covered with wood 21x145 UYS.
The ceiling is covered with wood UYS 21x145 and between rafters is insulated KIVIVILL 100mm and underneath a layer of plastic 0.2mm
Kesk-Kaare tee 50
74020 Harju maakond